Item #: W44CMP
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 10/2010
Parts List
Hardware List
Short wood dowel
16 pcs
Long wood dowel
Large cam lock
Small cam lock
6 pcs
32 pcs
8 pcs
Short cam bolt
Long cam bolt
24 pcs
8 pcs
Bolt
6 pcs
1 pc
Wrench
Handle
2 pcs
4 pcs
Round-head screw
Plastic wedge
Small screw
Large screw
8 pcs
8 pcs
8 pcs
Glue tube
Sticker
2 pcs
40 pcs
The hardware quantities listed above are required for proper assembly. Some
extra hardware may also have been included.
Screw short cam bolts (E) into stand top (1).
Attach feet (12) and stand support (11) to stand base (3) using bolts (G) and wrench (H).
Screw short cam bolts (E) into stand base (3).
Insert short dowels (A) into panels (8) on appropriate sides.
Insert short dowels (A) into panels (4,5,6,7) on appropriate sides.
Attach panels (5,6,7,8) to stand base (3) using cam bolts and dowels as guides. Note that panels (8) are not
attached to panels (6,7), but that all panels should align when attached to stand base (3). Secure panels
(6,7,8) to stand base (3) by inserting large cam locks (C) into panels (6,7,8) and tightening with a screwdriver.
Slide back panel (10) into the stand assembly along the grooves at the back of the assembly. Note that the
vinyl lamination of back panel (10) should face out.
7
Insert long dowels (B) into panels (6,7,8).
Attach middle panel (2) to stand assembly using dowels as guides.
Insert long cam bolts (F) into middle panel (2). Insert large cam locks (C) into panels (6,8) and tighten with a
screwdriver.
7
Insert long cam bolts (F) into middle panel (2). Insert large cam locks (C) into panels (7,8) and tighten with a
screwdriver.
Attach panels (4,8) to the stand assembly using cam bolts and dowels as guides. Secure panels (4,8) by
inserting large cam locks (C) into panels (4,8) and tightening with a screwdriver.
Attach panels (4,8) to the other end of the stand assembly using cam bolts and dowels as guides. Secure
panels (4,8) by inserting large cam locks (C) into panels (4,8) and tightening with a screwdriver.
Slide back panel (9) into the stand assembly along the grooves at the back of the assembly.
8
4
8
8
4
8
Insert large cam locks (C) into panels (4,8). Attach stand top (1) to the stand assembly using cam bolts and
dowels as guides. Tighten large cam locks (C) with a screwdriver.
Screw short cam bolts (E) into drawer fronts (17,18). Attach handles (J) to drawer fronts (17,18) using round
head screws (K).
Attach drawer sides (13,15) to drawer back (14) using large screws (N). Slide drawer bottom (16) into the
grooves of the drawer assembly. Note that the vinyl lamination of drawer bottom (16) should be on the inside
of the drawer. Repeat this step for the second drawer.
Attach drawer front (17) to the first drawer assembly using cam bolts as guides. Insert small cam locks (D) into
drawer sides (13,15) and tighten with a screwdriver.
Attach drawer front (18) to the second drawer assembly using cam bolts as guides. Insert small cam locks (D)
into drawer sides (13,15) and tighten with a screwdriver.
Carefully slide drawer assemblies into the stand assembly.
9
10
Secure back panels (9,10) to the stand assembly using plastic wedges (L) and small screws (M).
|
Technika Flat Panel Television LCD 32 256 User Manual
Therma Stor Products Group Ventilation Hood Quiet Vent Ventilation System User Manual
Timex Clock 753424T User Manual
Toastmaster Toaster T2055BC User Manual
Toshiba Laptop VF MB1 S15 User Manual
TP Link Modem TD W8951NB User Manual
Trane Microphone DX1B040A9H21B User Manual
Tripp Lite Surge Protector PS7224 20HW User Manual
U Line Refrigerator ICE MAKER REFRIGERATOR User Manual
Weber Gas Grill Platinum C User Manual