Targus MP3 Docking Station ACP60US User Manual

ExpressCardTM  
Notebook  
Docking Station  
with Digital Video  
and Audio  
USER GUIDE  
specifications subject to change without notice.  
© 2007 Targus Group International, Inc. and Targus, Inc.  
ACP60US / 410-0493-001C  
30  
 
TM  
TARGUS EXPRESSCARD  
NOTEBOOK DOCKING  
STATION WITH DIGITAL  
VIDEO AND AUDIO  
Introduction  
Congratulations on your purchase of the Targus ExpressCard  
Notebook Docking Station with Digital Video and Audio. This  
portable expansion module allows you to connect through an  
ExpressCard slot up to 4 USB devices, monitor or LCD, high-  
speed Gigabit Ethernet/LAN, 5.1 channel PC audio with  
optical fiber S/PDIF, and a serial port for legacy device.  
The docking station also offers Targus Always On technology,  
Targus USB Power Ports providing twice as much power as  
the standard USB spec and widely spaced to accommodate  
for larger adapters. Targus Always On provides power to the  
USB ports even when the notebook is shut-down, discon-  
nected from the docking station or in hibernate/stand-by mode  
which allows USB devices to keep charging.  
 
2
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Ergonomic Design  
Ergonomic design helps increase airflow under notebook for cooler  
operation. The raised platform provides a more comfortable position  
for typing.  
Features  
• (4) High Speed USB 2.0 ports  
• (1) Serial (RS232) port  
• (1) 24 pin DVI-D connector  
• (1) VGA (HD D-sub) HD-15 connector  
• (1) ExpressCard upstream cable connection  
• (1) RJ-45 Gigabit Ethernet 10/1000  
• (3) 5.1 Surround sound audio jacks  
• (1) Microphone In  
• (1) S/PDIF digital audio out (TOSLINK Optical Fiber Connector)  
• (2) Security Lock Slots  
Package Contents  
In addition to this user guide, the package contains:  
Targus ExpressCard Docking Station with Digital Video and Audio  
• ExpressCard Cable and Card (with spacer card)  
• AC Adapter (required to operate the dock)  
• Driver CD  
NOTE: TARGUS RECOMMENDS THAT YOU VISIT ITS WEBSITE AT  
THE LINK BELOW TO ENSURE THAT YOU HAVE THE LATEST DRIVER  
VERSION FOR A FREE DOWNLOAD. FOLLOW THE DOWNLOAD  
INSTRUCTIONS AND INSTALLATION STEPS IN THIS USER GUIDE.  
HTTP://WWW.TARGUS.COM/US/SUPPORT_DOWNLOADS.ASP  
 
3
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
System Requirements  
Hardware  
• PC with an Intel® Pentium® processor or equivalent  
• CD-ROM drive  
• ExpressCard 34mm or 54mm slot  
Operating System  
• Windows VistaTM or  
• Windows® XP - Service Pack 2 or greater  
NOTE: TO DOWNLOAD THE LATEST SERVICE PACKS, PLEASE VISIT YOUR  
COMPUTER MANUFACTURER’S WEBSITE OR MICROSOFT’S DOWNLOAD  
CENTER:  
Preparing the BIOS for the ExpressCard  
Before installing the ExpressCard Docking station, it is very important  
that you make sure that your system BIOS has the latest BIOS update  
available. A number of system vendors have released updates that fix  
many issues related to the ExpressCard Slot.  
 
4
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
About the ExpressCard Connector Card  
The ExpressCard dock comes with a cable, a spacer (see “Using the  
Spacer Connector” for additional instructions) and 34mm card to  
connect to an ExpressCard slot in your notebook. The cable is  
removable from the card.The card can be left in your system when not  
in use.  
The 34mm card has a small switch located in the circular area in the  
drawing below.  
When connecting the cable to the ExpressCard, Please make sure the cable tip is  
properly and completely inserted into the cable port on the ExpressCard. Make  
sure the tip is connected in the correct direction and do not force the connection  
or it might break the device.  
On-Pre-boot support  
Off-Post-boot support (Default)  
This switch is used to determine how the dock is recognized in the  
system at boot up stage. Certain notebooks will detect the dock and not  
work properly during a pre-boot mode (ie. trying to boot up on the  
external VGA device, not the internal VGA of the Notebook). This was  
observed in notebooks (Fujitsu, some Sony and Toshiba models) that  
use a BIOS developed by Phoenix Technologies. If you experience  
such issue, please turn the switch from the default "OFF" position to  
"ON".You will only need to set it once.  
 
5
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Using the Spacer Connector  
A spacer is supplied to ensure the proper fitting of the 34mm Express-  
Card into a 54mm slot. This spacer has no functionality other than to  
prevent any movement of the card once it is inserted into the 54mm  
slot. The spacer is not needed if you have a 34mm slot on your  
notebook. (See the diagram below as to the two different slots that are  
currently shipping in today's notebooks)  
The spacer simply snaps on to the existing ExpressCard and is  
inserted with the card connector into a 54mm ExpressCard slot.  
Carefully align the spacer with the ExpressCard and join the two  
pieces together by locking the clip in place.  
Please make sure that the clip is firmly secured and no gap is in  
between the two items. As shown in the diagrams above.  
 
6
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Instructions for connecting the spacer to  
the ExpressCard  
Before beginning make sure the spacer and PC card are aligned as  
below.  
1. When attaching the spacer, ensure the spacer is at a 45 degree  
angle to the PC card. Please make sure the hook on the spacer is  
sitting in the slot on the PC Card. Refer Fig 1.  
2. Push down on the spacer as shown while applying firm pressure to  
both the PC card and spacer.  
Fig. 1  
1
2
Finally, make sure the two clips on the spacer are firmly and squarely  
pushed into the slots on the PC card.  
When removing the spacer, pull in an upwards motion to detach.  
Attach  
Detach  
 
7
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Installing the Docking Station Driver  
Installing the docking station driver enables your operating system to  
recognize the docking station and its ports once it’s connected.  
1. Turn on your computer.  
2. Insert the driver software CD into your computer’s CD-ROM drive.  
If setup does not begin automatically, click Start, Run, and enter  
D:\Setup.exe (where D: is the path of your CD-ROM drive) and then  
click OK.  
3. The Installation Wizard window of the docking station will pop up.  
Follow any on-screen instructions to complete the installation.  
Please connect the ExpressCard into the slot when prompted.  
Connecting the Docking Station toYour Computer  
Step 1. Connect the supplied AC power adapter to the AC power  
jack on the docking station.  
Step 2. Connect one end of the ExpressCard cable to the docking  
station and the other end into the ExpressCard Card.  
Step 3. Connect the ExpressCard Card into an available Express-  
Card slot in your notebook.  
WARNING: THE DOCKING STATION WILL NOT FUNCTION PROPERLY WITHOUT  
THE AC ADAPTER PLUGGED INTO AN AC OUTLET.  
DO NOT CONNECT ANY DEVICES TO THE DOCKING STATION UNTIL THE  
SOFTWARE HAS BEEN INSTALLED AND THE AC ADAPTER HAS BEEN  
PLUGGED IN.  
 
8
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
4. After connecting the ExpressCard to the computer, wait until the  
computer finishes recognizing the devices before pressing OK in  
the dialogue box. This process will take about 3-5 minutes.  
Windows XP- dailogue box  
Windows Vista - dailogue box  
Click Finish and restart your computer when prompted by the  
docking station’s installation software. In order to install the driver  
files properly, you must make sure the installation is completed  
before restarting the computer.  
WINDOWS VISTA WILL PROMPT  
A
MESSAGE BOX TO RESTART THE  
COMPUTER DURING THE DRIVER INSTALLATION PROCESS. PLEASE IGNORE  
THIS MESSAGE. THE DOCKING STATION’S DRIVER INSTALLATION SOFTWARE  
WILL PROMPT THE RESTART MESSAGE WHEN INSTALLATION AND DRIVER  
SETUP IS COMPLETED.  
Window Vista - restart screen  
Docking station - restart screen  
5. After restarting, the computer will recognize the docking station and  
the default drivers will finish installing for each of the devices  
automatically. Please wait until this process iscompleted. The  
screen’s resolution will adjust and refresh during this process.  
NOTE: THIS SETUP PROCESS WILL REQUIRE SOME TIME FOR THE DRIVERS TO  
INSTALL PROPERLY. IT MIGHT TAKE UP TO 5 MINUTES OR MORE DEPENDING  
ON YOUR COMPUTER’S CONFIGURATION.  
6. You will see a Targus Display logo icon located on the system tray.  
The monitor mode selection can be set by right clicking on this icon.  
NOTE: IT IS RECOMMEND TO SET THE MODE TO “EXPRESS CARD VGA” OFF  
WHEN USING ONLY ONE MONITOR. THE DEFAULT SETTING IS “EXTENDED  
MODE”.  
 
9
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
LED Status Indicator Lights  
Once all device drivers are installed, the USB LED status indicator  
lights on on each side of the docking station glow when you connect  
devices to the docking station.  
• Green Tx light illuminates when connected to a network and the  
yellow Rx light flashes when data is transmitting to or from the  
network.  
• The Power LED will glow when the AC power cord is plugged into the  
Docking station  
Docking Station ports  
Laptop Support Pad  
Laptop Support Pad  
Gigabit Ethernet  
VGA  
ExpressCard  
DVI-D  
Serial  
upstream  
cable  
connection  
5.1 Surround  
Sound &  
Microphone  
Power and  
Power LED  
 
10  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Lock slot for use with  
Targus locks - Models  
nos. PA410U or  
“Easy Access”  
High power USB  
ports with  
PA450U (not included)  
LED light indicator  
Connecting New Devices  
To avoid possible damage when connecting a new device, do not force  
the cable connector into the port on the docking station. If the cable  
connector does not attach smoothly, turn the connector over and try  
attaching it again.  
Connecting a Serial Mouse / Keyboard  
To connect a serial mouse or keyboard, attach the cable connector to  
the serial port on the docking station.  
Connecting and Configuring a Serial Modem  
To connect a serial modem:  
1. Attach the cable connector to the serial port on the docking station.  
2. Install the modem software driver according to the instructions that  
come with the device.  
3. When prompted to select the port, choose the Serial USB (COMx),  
where x is the COM port number assigned by your operating system.  
 
11  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Connecting a PDA  
1. Attach the cable connector to the serial port on the docking station.  
2. Verify that the COM port setting, in either your HotSync® or  
ActiveSync® software, matches the setting on the docking station.  
To verify the COM port setting on the docking station, refer to  
“Verifying Devices are Installed”. To verify the COM port setting on  
your PDA, refer to the documentation that came with it.  
Connecting to a Local Area Network  
To connect an Ethernet cable with an RJ-45 connector, attach the  
cable connector to the Ethernet/network port on the docking station.  
Additional procedures to connect to an actual network depend on the  
type of network you are using. Contact your network administrator for  
detailed instructions.  
NOTE: THE DOCKING STATION SUPPORTS HOT SWAPPING OF THE NETWORK  
CABLE.  
Connecting a USB Device  
To connect a USB device, plug it into a USB port on the docking station  
and follow the additional instructions provided with the device. All four  
USB ports meet USB High-speed requirements of a 480Mbps transfer  
rate and a minimum of 500mA of power. Note that 2 out of the 4 USB  
ports are designed to provide 1000mA, twice as much as standard  
USB specifications. See “Targus Always On” and “Using USB Devices  
That Require More Power” for more details.  
 
12  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Connecting and Configuring an  
Audio Device  
This docking station comes with a 5.1 Audio Support. The back of the  
Device has 5 ports dedicated to Audio.  
NOTE: IF YOU ARE HAVING PROBLEMS WITH YOUR SPEAKERS AFTER  
ATTACHING THE DOCKING STATION, PLEASE SEE THE TROUBLESHOOTING  
SECTION FOR MORE INFORMATION.  
MIC  
S/PDIF  
FRONT  
CENTER  
REAR  
Microphone In – Pink  
Front Channel or Line Out – Green  
Rear Channel – Black  
Center Channel / subwoofer– Orange  
S/PDIF – Digital Audio Interface (PCM, Dolby Digital 5.1)  
1. To use stereo headphones or speakers, plug them into the green  
3.5mm port.  
If you have a 5.1 speaker setup, connect the Front Channel Speaker  
into the green 3.5mm port. Connect the Rear speaker into the Black  
3.5mm port. Connect the Center Channel into the Orange 3.5mm  
port.  
 
13  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
2. To connect a microphone, plug it into the Pink 3.5mm port.  
3. To enable your headphones or speakers, you must first choose C-  
Media USB Sound Device in the Properties Settings  
4. For Windows® XP, go to the Control Panel and choose Sound and  
Audio. Select the Audio tab. Under Sound Playback, change  
Preferred Device to C-Media USB Sound Device from the drop  
down list.  
Click Apply, then click OK.  
5. Make sure the volume is not set to MUTE.  
NOTE: AUDIO DEVICES WILL NOT WORK SIMULTANEOUSLY ON THE DOCKING  
STATION AND THE HOST COMPUTER.  
CAUTION: ALL AUDIO OR MULTIMEDIA APPLICATIONS MUST BE TERMINATED  
BEFORE SWITCHING BETWEEN THE PORT STATION AUDIO OUTPUT AND THE  
HOST COMPUTER AUDIO OUTPUT.  
 
14  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Installing and Configuring a S/PDIF  
(Sony/ Philips Digital Interface)  
Device  
1. In order to enable S/PDIF, you have to turn it on. This can be done by  
opening the USB 3D Sound Configuration applet located in your  
system tray. (click on the USB icon to open up the Configuration  
Screen)  
2. Click on the button next to the S/PDIF Output text to enable S/PDIF  
3. Set the Audio Output from the tray to digital audio  
4. Plug your TOSLINK cable (not included) into the S/PDIF-Out port of  
Docking Station on one end, and the S/PDIF-In port of Digital  
Decoder or Speaker on the other end.  
NOTE: NO NEED TO CONNECT ANY OTHER SPEAKERS CABLES IF THIS OPTION  
IS SELECTED. THE OPTICAL TOSLINK CABLE IS THE ONLY CABLE REQUIRED.  
5. Connect your Digital Decoder or Speaker to the Home Theater  
System.  
 
15  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Connecting to a Monitor or LCD  
Any monitor or LCD connected to the video port of the docking station  
will be limited to a maximum resolution of 1600x1200, 32-bit color.  
Video Menu Options  
Video menu options can be accessed by right-clicking on the Targus  
Display icon in the system tray or through the Windows Display Proper-  
ties.  
The only menu option not accessible through Windows Display Proper-  
ties is Mirror. This must be accessed through the Targus Display icon.  
To change the resolutions using the Windows Display properties:  
1. Place the mouse on an empty spot on your desktop, then right click and  
select properties.  
2. On the Display properties screen, Click on the "settings" tab.  
3. Change the screen resolution or color depth in this screen.  
4. Click "OK" to close the "Display properties" screen  
To Change the resolution and modes using the Targus Display icon:  
1. Position the Mouse on the top of the Targus Icon and right click on it.  
2. From this screen, you can change the resolutions and modes that  
the Dock operates in (see below explanation of the video modes  
supported).  
Primary: You are using a monitor or LCD (not your notebook screen) as  
your primary screen.  
Extended: You are using your notebook screen as your primary display and  
your monitor or LCD is a secondary screen, extending your desktop to span  
both screens.  
Mirror: You are using your notebook screen as your primary display and  
your monitor or LCD replicates your notebook screen.  
Off: You are using your notebook screen as your primary display and your  
monitor or LCD is turned off.  
Resolution: Changing resolution from the Targus utility will only affect the  
monitor connected to the docking station video port.  
 
16  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Notebook  
Screen  
Secondary  
Monitor or LCD  
Primary:  
Extended:  
Mirror:  
Off:  
Off  
On  
On  
On  
On  
On  
On  
Off  
NOTE: SOME LCDS HAVE BEEN OPTIMIZED FOR A SPECIFIC RESOLUTION. IF  
THE OPTIMUM RESOLUTION IS NOT 1280 X 1024, THE RESULTS MAY NOT BE  
AS DESIRED.  
Video output will support the following  
resolutions and color quality:  
Mode  
UXGA  
Aspect  
ratio  
4:3  
Resolution  
1600x1200  
Color  
Depth  
16  
Refresh Rate  
60HZ, 65HZ,  
70HZ, 75HZ,  
85HZ  
UXGA  
4:3  
1600x1200  
1680x1050  
32  
32  
60HZ, 65HZ, 70HZ  
WSXGA+  
16:10  
60HZ, 65HZ, 70HZ  
60Hz  
SXGA+  
SXGA  
4:3  
5:4  
1400x1050  
1280x1024  
16  
16,32  
60HZ, 75HZ , 80HZ  
60HZ, 75HZ, 85HZ  
QVGA  
4:3  
1280x960  
16,32  
WXGA+  
WGA  
16:10  
15:9  
16:10  
4:3  
1440x900  
1280x768  
1280x800  
1024x768  
32  
60Hz  
60Hz  
60Hz  
16,32  
16,32  
16,32  
WXGA  
XGA  
60HZ, 70HZ,  
75HZ, 85HZ, 120HZ  
SVGA  
VGA  
4:3  
4:3  
800x600  
640x480  
16,32  
16,32  
60HZ , 72HZ,  
75HZ , 85HZ,  
120HZ , 160HZ  
60HZ, 72HZ,  
75HZ, 85HZ,  
120HZ, 160HZ  
NOTE: ALL REFRESH RATES LISTED ARE NON-INTERLACED.  
 
17  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Global Suspend Mode  
When your computer is in suspend mode, the docking station also  
enters suspend mode to avoid power consumption. When your  
computer wakes up, the docking station wakes up automatically.  
Using USB Devices that Require  
More Power  
This docking station is designed with 4 USB High Power Ports 2 of  
which, providing up to 1000mA of power each. They can be used to  
connect to peripherals that requires more power such as printers,  
scanners, optical drives, and others.  
 
18  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Troubleshooting  
Device Not Working  
• Make sure that the device is fully inserted into the correct port on the  
docking station.  
• Plug the device into a different port on the docking station. If it still  
doesn’t work, test the device by connecting it directly to your  
computer.  
• Verify that you ran the Setup or Install program for the device.  
• Make sure that the device appears in Device Manager. For more  
information refer to “Verifying Devices are Installed”.  
• Disconnect all devices from the docking station and reconnect them,  
one at a time. Check that each device works before plugging in the  
next one.  
• Each USB port is equipped with over-current protection. Should a  
USB device draw more current than the USB port can supply, the port  
will shut down. To re-enable the port, unplug the device and go to  
Device Manager or to the message in the system tray and choose the  
Reset option.You can then plug the device back into the USB port. If  
a shut down reoccurs, check the power requirements of the device.  
Verifying Devices are Installed  
You can view the devices installed on the docking station from the  
Device Manager window in System Properties.  
Right-click My Computer, Properties, then click the Hardware tab,  
and then the Device Manager button.  
 
19  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
From the Device Manager window, expand the following:  
• Display Adapters - Targus ExpressCard w/ video  
• Human Interface Devices - displays keyboards and pointing devices:  
mice, trackballs, and joysticks  
• Network Adapters — Realtek RTL 8110SC Ethernet Adaptor  
• Ports (COM & LPT) — Serial on USB [COM x]  
• Sound, Video and Game Controllers — displays USB audio device  
• Universal Serial Bus controllers — displays the other devices  
installed for the docking station and generic hub  
Verifying a Serial Modem Connection  
When attaching a modem to the serial (RS232) port, verify that the port  
assigned to your modem is Serial USB (COMx), where x is the number  
of the COM port.  
If the operating system does not detect automatically that your modem  
is assigned to Serial USB (COMx), run the Hardware Wizard again and  
choose Select from the list instead of Autodetect. Then, select Serial  
USB (COMx) as the COM port.  
Error Message on Your PDA  
If the error message “Connection Not Established” appears on your  
PDA, check that the COM port setting in either your HotSync or  
ActiveSync software matches the setting on the docking station. See  
“Verifying Devices are Installed” to verify the COM port setting on the  
docking station.  
Some older versions of the Palm® Desktop software are not compat-  
ible with the USB to Serial conversion. Please contact your PDA  
vendor for software updates.  
 
20  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Video  
Can I get a higher resolution on my monitor?  
• Highest resolution is 1600 x 1200, 32-bit color.  
Movie playback is not smooth when played at 1600x1200x32 bit  
resolution. It is worse when playing a media clip in full screen?  
The Targus ExpressCard Docking station is not primarily designed for  
playing back movie content at maximum resolution and color depth.  
The best mode for displaying video content is at 1280x1024 (SXGA)  
resolution or lower.  
The reason for this is the large amount of display data being  
transferred during movie playback. Standard DVD movies are encoded  
at a resolution of 720x480 (NTSC), and 720x576 for PAL discs. Higher  
resolution display of the video will result in upscaling the display to the  
higher resolution, which does not gain any net affect on the playback of  
the movie.  
Ways to improve the smoothness of the movie playback are:  
• Reduce the resolution of the display to 1280x1024 with lower color  
depth (16 Bit Color)  
Terminate any other CPU intensive applications running on the  
computer.  
I cannot play a DVD using the Docking station?  
DVD playback is controlled by the DVD playback software and the  
hardware on your notebook. Many DVD playback software programs  
are not capable of supporting DVD playback on an external or second-  
ary monitor. If you encounter problems playing back videos in  
Extended mode, try switching the Video mode on the Docking station  
to Primary or Mirror mode.  
Unexpected Crashes or power state issues?  
Please make sure you have upgraded your system BIOS on your  
notebook. Several popular notebook vendors have released BIOS  
upgrades that resolve a number of ExpressCard related issues  
(Lenovo, Fujitsu).  
 
21  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
My system crashes during boot up with the Card connector  
installed?  
Try switching the Pre-boot switch to the on position and boot again.  
Can two separate displays be connected to the ExpressCard  
Docking station (VGA and DVI-D) and display two separate  
images or work to extend the display across three screens  
(including the Notebooks screen)?  
No. The output from the VGA port and the DVI port are the same.  
My screen becomes blank (black) when I connect the Express-  
Card to my computer.  
Make sure the ExpressCard is properly connected and check the  
display mode in the system tray so that the setting is correct.  
Audio  
I cannot hear anything through my Notebook's Speakers.  
Some Notebooks default to the ExpressCard Docking station's  
onboard USB Audio device when the Docking station is connected,  
disabling your notebook's built in speakers.To enable your Notebook's  
speakers, do the following:  
1. Open the Control Panel, and select "sounds and Audio Devices".  
2. On the "Audio" Tab under the "Sound Playback" section, select  
your Notebook's internal Audio device (will be a device other than  
the USB Audio device of the Docking Station).  
If you still cannot get the Audio device to Play from your speakers:  
1. Open the Control Panel, and select "sounds and Audio Devices".  
2. On the "Audio" Tab under the "Device Volume" section, click  
"Advanced".  
3. Uncheck the "Mute All" box  
NOTE: YOU WILL NEED TO CLOSE ANY APPLICATIONS THAT ARE USING  
AUDIO AND RESTART THEM IN ORDER TO ENABLE THIS CHANGE.  
 
22  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
Technical Support  
For technical questions, please visit:  
US  
Australia  
Telephone: 1800-641-645  
New Zealand Telephone: 0800-633-222  
Product Registration  
Targus recommends that you register your Targus accessory  
shortly after purchasing it. Go to:  
will need to provide your full name, email address, country of  
residence and product information.  
Warranty  
Targus warrants this product to be free from defects in materi-  
als and workmanship for one year. If your Targus accessory is  
found to be defective within that time, we will promptly repair  
or replace it.This warranty does not cover accidental damage,  
wear and tear, or consequential or incidental loss. Under no  
conditions is Targus liable for loss of, or damage to a devices  
nor loss of, or damage to, programs, records, or data; nor any  
consequential or incidental damages, even if Targus has been  
informed of their possibility. This warranty does not affect your  
statutory rights.  
Regulatory Compliance  
This device complies with Part 15 of the FCC Rules. Opera-  
tion is subject to the following two conditions: (1) This device  
may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that  
may cause undesired operation.  
 
23  
Targus ExpressCard Notebook Docking Station with Digital Video and Audio  
FCC Statement  
Tested to Comply  
This equipment has been tested and found to comply with the limits of  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and if not installed and  
used in accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna;  
Increase the separation between the equipment and receiver;  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected;  
Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not authorized by the party responsible for  
compliance could void the user’s authority to operate this product.  
Windows and ActiveSync are registered trademarks of Microsoft Corporation. Palm and HotSync are a  
registered trademarks of Palm, Inc. Microsoft, Windows, and Windows Vista are either registered  
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All  
trademarks and registered trademarks are the properties of their respective owners. All rights reserved.  
© 2007, Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA.  
 
24  

Technika Flat Panel Television LCD 24 621 User Manual
Toastmaster Oven TOV435RLB User Manual
Toshiba Tablet PDA0EU00101Y User Manual
TP Link Network Card TL PA4010 User Manual
Transition Networks Network Card CETTF10XX 200 User Manual
Tripp Lite Network Card P222 010 User Manual
Tunturi Home Gym Alpha 150 User Manual
Universal Remote Control Video Gaming Accessories URC A6 User Manual
ViewSonic Projector VS13648 User Manual
Weber Burner 1000 LX Series User Manual